How to Fix Roku Low Power Errors?

Roku Low Power

Are you frustrated that you are unable to manage your Roku device and that it keeps displaying the Roku low power error? Well, now that you have reached here then you need not worry anymore. In this blog, you will learn how to get the issue resolved in no time. All you would need to do is follow the given instruction according to get the desired results.

Geeks Tech Support Number :- +1-888-256-6612

5 Ways To Fix Roku Low Power Error

The 5 Methods Listed Below Will Show You How To Repair The Roku Low Power Error:

So now if you are facing the issue with the go Roku com low power then below you will be guided through a few steps which will help you get your Roku device running again. You will find that every solution is described in detail so that you can handle the same without any difficulty. But before that, you can also have a look at some advanced tactics that are very useful as well and have been applied by many customers.

Troubles Hooting Tactic

Check The Power Supply And Cable – you will need to make sure that the power source is consistent and reliable as well. If it is a small stick then you could swap their USB cable to another port on the TV or you could just use a wall stick. However, for larger units, you should replace the power cable adapter. And now check the power cable for damages if any or signs of wear and tear; if you find any damages then you should replace them if necessary.

Restart Your Roku – you must have already tried this process – however, you could go through the process once again and power cycle everything to clear one-off glitches.

Update Roku’s software – Here you will need to navigate through Roku’s settings to find out the software update options. You may already know that regular updates can help resolve many power-related issues.

Factory Reset Of  The Device – You should navigate to Settings > System>Advanced system settings > and then to Factory reset. After this, you just got to follow the prompts on-screen to get through the process.

Factory reset of the roku device

Contact Roku Support – now in case none of the above solutions has worked out for you then you can choose to contact Roku support and get assistance right away.

Checking USB Ports And Cables

TIP: You should know that most Roku power errors are cause due to the cable not being connect properly to a power source (USB port or adapter) that can support the device.

Therefore the first thing you must do is check your USB cable and ports. You got to make sure that the cable you have connect the cable properly and see to it that the port is not damage. Furthermore, if you are using a USB port on your TV then you should try a different port or use a wall adapter instead. This is because not all USB ports supply enough power to the TV.

Doing so usually provides additional power that is need to run the Roku device smoothly. And if the power adapter is need to be replace then you should consider purchasing an official Roku adapter or an equivalent that is rate for Roku itself to ensure compatibility.

Restarting The Roku Device

Do you know that many times only a simple restart resolves the low power issue? Yes, therefore to do so you would need to go to go to ‘Settings > System > System restart’. And then alternatively you should unplug the device from the power source and plug it back in again after some time.

Restarting the Roku device

Software And System Updates

You got to make sure that your Roku device is running the latest software and system updates. Hence to check for updates you will need to go to ‘Settings > System > System update’. And now if you see an update available then you should follow the given on-screen instruction to start the installation.

Software and System updates

The Nuclear Option – Factory Reset Your Roku Device

In case the above solutions do not work and you still face the same issue then you should try a factory reset. However, you must keep in mind that doing so will erase all the settings and data as well on your Roku device. Therefore you must ensure that you back up any important data before you proceed.

To begin a factory reset of the Roku device you would need to go to ‘Setting > System > Advanced system settings > Factory reset’. And now you just need to follow the instructions given on-screen to complete the reset.

Factory reset

NOTE: You should know that resetting the device can add a little more work but you would need to set the device up again.

If you still struggle with the issue then you can decide to contact Roku support for further guidance. They will surely help to diagnose if there are any hardware or software-related problems that could cause the low power error.

Contact Roku Support 

If none of the suggestions above work, you might need to get in touch with Roku support. They can aid in determining if the low power error is being cause by hardware or software problems. Your equipment might need to be replace if it is still cover under warranty.

The Causes For A Roku Low Power Error:

Well, it is important to know that the low power error occurs on a Roku device when it is not receiving enough power to function as it should. Hence this error may happen if the device is power by connecting to the USB port of the TV and is not always sufficient to provide enough power.

Furthermore, a faulty power cable or a damaged device can also be the cause of the low power error. And if it is found to be so then it would be necessary to replace the cable or the Roku device.

How To Avoid Low-Power Errors On A Roku Device?

We understand that having a low power issue on your Roku can be frustrating at times nevertheless, you would be glad to know that there are several measures that can you can apply to prevent the issue from occurring. Below you will find some tips that will surely help you avoid the power-related issue with your Roku device.

Clearing The Cache

This is an important way where you can definitely prevent the low power issue. As understood over time, the cache can be an obstacle to any device and can become cluttered with unwanted data. Well, this unwanted data can slow down the performance of your device and cause it to use more power than usual.

To be able to clear the cache you should go to ‘Settings > System > Advanced system settings > Storage > Clear cache’. Doing this action will help free up space on the Roku device and also help it run more smoothly.

Usage Of  The Right Adapter

You must know that using the right adapter and cable is very important as this is also how you can prevent you’re low power error. Therefore you got to make sure that you use the official Roku adapter and cable; using a third-party adapter or cable can also be the cause of the issue.

Roku adapter

In addition, if you use an extension cable then you need to ensure that it is a high-quality cable and can handle the power requirements of the Roku device. In case you need to replace the products then you must always choose to buy Roku brand products to make sure that the right quality and power management abilities or trusted devices are rate to use on Roku.

Related Articles:-


After you have gone through the above steps and instructions you should be over with the issue and your Roku should be working again smoothly than before. However, if not so or if you have other related concerns as well then you can opt to connect with Geeks Tech Support Number:- +1-888-256-6612. The highly trained and eligible techs provided are available around the clock and you can feel free to share anything related to your Roku device.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top