Brother Printer Error TS-02 is the most common error many users have confronted during their print job and raised a voice of assistance to fix it. This specific error issue will appear when the WLAN access point or router is not detect by the system while printing. You don’t need to wag off; we are here to guide you to deal with such a problematic error code in an effortless manner. You can also call us if you are not able to solve the problem.
Every user, when buying a printing machine, has their main motto as getting the quality printouts of any documents. So, when we talk about a quality-based printing service, Brother Printer is preferable as it has unique and advanced features that make the print job very easy. While few errors may also take place during printing from your Brother printer.
Reasons Why Facing Brother Printer Error TS-02
Numerous possible reasons that can cause Brother Printer Error TS-02 are below. Let’s have a glimpse:
- Damaging a Windows system file can cause such an error code TS-02.
- Due to corruption of system files.
- Incomplete or inappropriate installation of printer driver.
- Improper or incomplete deletion of any hardware from the operating device.
When you receive Brother Printer Error TS-02 due to any of these causes, you have to keep calm and read the blog post. Here, your problem will be solved in a short span.
Fix Printer Error
Step-by-step troubleshooting shooting procedures for Brother Printer Error TS-02 are mentioned underneath. So, in spite of looking here and there, keep your eyes focused on the given noted points.
While we purchase a printer, basic qualities that we keep in mind are reliability, printing quality, & use of less consumables. Brother printers have been considered one of the most efficient printing machines for years, providing quality printouts. However, you may face some common errors on your Brother printer.
Brother Error TS-02 is a common error when working with a Brother printer. In order to resolve this, many users have searched for a quick and easy troubleshooting & requested the same too. Let us find out if the following easy-to-follow steps will get Error TS-02 fixed in minutes, that too, by ourselves. So don’t sweat; just follow these simple steps and fix your printer by yourselves.
Steps :
- To start off, please try to check your printer’s connectivity to your WLAN access point/router.
- Now, connect your computer to the internet with built-in wireless LAN making sure that WLAN works correctly.
You won’t be able to fix Error TS-02 if your internet connection and speed are poor or unreliable.
- As now we’ve managed this far. It’s time to get your printer close enough to the router; make sure there is no obstruction between the printer and the router for good connectivity.
- Then check and make sure the WLAN access point router is using MAC address filtering. Then make sure the MAC address of the Brother printer is allow in the filter from the network configuration list.
- If your Brother Printer uses 5 GH Radio signals instead of 4 GH, Brother printer error TS-02 is more likely to appear.
- Now open the control panel of your computer and then open the setup wizard of your printer.
- Then mention the standard radio signal & your Brother printer will now start printing uninterruptedly.
We provide remote support for computers, printers, email, browsers, genealogy software, etc. If you are getting any issue, you can call us or visit our website. Geeks Support Number: +1-888-256-6612 Live Chat with our technician.