How to Sync Roku Remote Without Pairing Button? To begin with, most Roku remotes have a special button that lets the user easily connect them to the TV. But the question here arises what if your remote does not have this handy button? Or how would you connect it to your TV? Therefore, if you have such queries or you are finding it difficult to sync Roku remote without pairing button then you have surely made it to the right place.
Here in this guide, you will come across the different ways of sync Roku remote without pairing button. It may seem a little difficult at first but you need not worry. All the clever tricks and methods are explain here that will help to make syncing easier and smoother. So if you have lost your remote or you cannot reach the pairing button then this is just the perfect article that will help you figure out and solve the issue. Hence to discover how to sync Roku remote without pairing button.
How Does A ROKU Remote Actually Work?
Well, the Roku remote works by sending signals to your Roku streaming device which allows you to control it from a distance. Roku comes with different kinds of remotes such as the Roku simple remote and the Roku voice remote. Both Roku remotes use different ways of talking to the Roku devices.
- Now the Roku simple remotes use the invisible light that is called ‘Infrared’ (IR) for sending button commands. It needs to be pointed straight at the Roku device to have it work. Whenever you press the button on the remote, it emits an invisible ‘IR’ signal that is detected by your Roku’s ‘IR’ receiver, which converts it into electrical signals for action.
- Then, in contrast, the Roku voice remote uses a Wi-Fi connection, which eliminates the need for direct alignment. Pressing the buttons is transmitted via a Wi-Fi network which allows the remote to be used from various angles. Besides the voice remote features a built-in microphone for voice commands. You just have to push the microphone button, and then speak to it and it will do exactly what you say.
What Is Pairing/sync Roku remote without pairing button All About?
To pair or synch a Roku remote is the method where you need to connect the remote to the Roku device. It is even more necessary if you have a new remote or if you’re current remote is not functioning properly. Hence there are two primary ways to get it done; one involves using a dedicate pairing button on your remote and the other relies on the prompted on-screen instructions.
To be able to use the paring button method you just need to press a special button on your remote and then what the Roku device tells you to do. Now to use the on-screen instructions you would need to go into your Roku’s menu and then follow the steps given to connect it with the remote. In both methods, you must make sure that the remotes communicate effectively with your Roku device.
How to sync Roku remote without pairing button?
1) The ROKU App
Follow the steps below to connect your Roku remote using the Roku mobile app:
- You must first make sure that both your Roku device the mobile device are on the same Wi-Fi network.
- Next, you will need to open the Roku app on your mobile phone.
- After that, you should tap on ‘Remotes’ in the app.
- Then you will need to select the ‘Add remote’ option.
- You now need to choose your Roku remote from the given list of available devices.
- Now just follow the given on-screen instructions by the app to complete the synchronization process.
2) Manual Pairing
- You need to begin by powering on your Roku device.
- And then you must navigate to the ‘Home’ screen on your TV.
- You also need to navigate to the ‘Settings > Remotes and devices > Remotes > Add remote’ section.
- After doing so you should select the ‘Manually add remote’ option.
- Now you just got to follow the instructions on your screen for the remote to be synchronize.
You need to know that the specific on-screen instructions may differ; it depends on the Roku remote model.
3) Power Cycling The Device & Remote
- You will need to first unplug your Roku device from the power.
- Then check for the pairing button on your remote if not.
- You can remove the batteries from your Roku remote.
- You now need to wait for at least 30 seconds.
- After that, you should plug your Roku back again.
- Next, you will need to reinsert the batteries into the Roku remote.
- Now just press and hold the back button and Home button on the Roku remote for about 5 seconds.
- When you do that it will set to Bluetooth pairing mode.
- You now need to release the ‘Home’ button when you start seeing the remote blinking.
- At last, you just need to connect the remote to the required device.
Is It Possible To Operate ROKU With A Universal Remote?
Yes, definitely, you can use a universal remote to operate Roku however, not all universal remotes are compatible with Roku devices. Therefore to check the compatibility, you will need to refer to the remotes manual or you could also contact the manufacturer. If it is found compatible then you will need to program it by entering the Roku device code which is in the manual or the manufacturer’s website. Now after it has been programmer you can easily control your Roku with the original remote but some features may not be available on a universal remote.
Conclusion
Now that you have read through the above instructions we hope that you find it useful and are all set or sync Roku remote without pairing button. Nevertheless, if you also have other queries related then you can feel free to contact the Geeks Technical Support at +1-888-256-6612 or Live Chat with our Technician.